home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
BBS Toolkit
/
BBS Toolkit.iso
/
wildcat
/
wc_bink.zip
/
BINKLEY.CFG
< prev
next >
Wrap
Text File
|
1992-12-17
|
13KB
|
293 lines
;-----------------------------------------------------------------------------
; BINKLEY.CFG - Configuration File for BinkleyTerm 2.56 Beta
; ----------------------------------------------------------------------------
;
; ----------------------------------------------------------------------------
; All configuration options are explained in detail in the Reference
; Guide section, "Configuration File."
; ----------------------------------------------------------------------------
;
; ----------------------------------------------------------------------------
; The following may apply to all BinkleyTerm installations:
; ----------------------------------------------------------------------------
;
; Port The desired FOSSIL port to use, normally 1=COM1: and 2=COM2:
; Baud Maximum baud rate (300,1200,2400,4800,9600,19200,38400)
; Carrier Your carrier mask in hex (usually 80)
; Init Initialization string for your modem
; TermInit Initialization for terminal mode only operation
; Prefix Your modem's dial prefix (ATDT or ATDP)
; Suffix Your modem's dial suffix (if you need one, normally not)
; Busy What BinkleyTerm sends to the modem while doing other things
; Answer Use when modem isn't set to auto-answer, string to send to answer
; PreDial Modem string sent before dial string (Prefix) to override default
; PreInit Modem string sent before init string (Init) to override default
; ModemTrans Dynamic selection of modem prefix and suffix based on nodelist
; DTRHigh Leaves DTR (data terminal ready) line "high" on exit
; Protocol To use an Opus-CBCS style external protocol for Terminal Mode
; StatusLog Path/filename of the desired log file, if any
; Downloads Path to put downloaded files into
; CaptureFile Designates file to use with Alt-L session logging feature
; LogLevel Amount of logging desired, 1-5 (1=minimal, 5=maximal)
; Gong Gong on successful connection or file transfer in terminal mode
; Rev3 Forces BinkleyTerm to assume Revision 3 FOSSIL driver
; SlowModem Add 1/10th second delay between modem command characters
; LockBaud This statement is obsolete - lock your FOSSIL baud rate instead!
; AutoBaud Always dial at baud rate listed above instead of nodelist rate
; TaskView Tells BinkleyTerm to release time slice on TaskView systems
; TopView Tells BinkleyTerm to release time slice on TopView systems
; MultiLink Tells BinkleyTerm to release time slice on MultiLink systems
; Macro Sends string over the line in Terminal Mode (Alt-F1 thru Alt-F9)
; Include Designates name of file with additional configuration statements
; Application Ignored by BinkleyTerm, may be used by other applications
; AnswerBack Sends designated text in response to ENQ char in Terminal Mode
; PollTries Number of times BT will dial during a dial or poll
; SwapDir Enables shell swapping and designates dir to place swap file
;
; ----------------------------------------------------------------------------
;
Port 1
Baud 19200
Carrier 80
; NOTE! Refer to BT_REF.DOC for dial translation characters
;---------------------------------------------------------------------------;
; Init string below is for my Supra V32bis Faxmodem ;
;---------------------------------------------------------------------------;
Init AT&F2W2M0E0S25=1S95=3S110=1S7=45|
TermInit ATV1Q0X1E1S37=0|
Prefix ATS37=0DT
; Suffix
Busy ATM0S0=0H1|
; WARNING! Refer to BT_REF.DOC for details about 'Answer' statement!
Answer ATA|
; PreDial `
; PreInit |v``^``
; Modemtrans 1 is for HST-flag nodes.
;ModemTrans 1 ATX3\\N3DT/
;ModemTrans 2 ATX3\\N3DT/
;ModemTrans 3 ATS37=9DT/
;ModemTrans 4 ATX3\\N3DT/
;ModemTrans 5 ATX3\\N3DT/
;ModemTrans 6 ATX3\\N3DT/
;ModemTrans 7 ATX3\\N3DT/
; ModemTrans 3 prefix/suffix ; HST or PEP
DTRHigh
; Protocol c:\opus\kermit.exe
StatusLog d:\binkley\binkley.log
Downloads d:\binkley\files\
CaptureFile d:\binkley\session.log
LogLevel 5
Gong
; Rev3
; SlowModem
LockBaud
AutoBaud
; TaskView
; TopView
; MultiLink
; NOTE! In the next statement, Alt-F1 would send "Name" + carriage return
; Macro 1 Name|
; NOTE! In the next statement, Alt-F2 would send "Password" + carriage return
; Macro 2 Password|
; Include suplmnt.cfg
;Application Amax Direct
AnswerBack Kevin Brokaw|
PollTries 10
SwapDir e:\
;
; ----------------------------------------------------------------------------
; In addition to the above, if you intend to run BinkleyTerm for point
; operation or mail interface operation, the following also may apply:
; ----------------------------------------------------------------------------
;
; System Name of your system (if mail interface, BBS name)
; Sysop Your name
; Address Your network address, including zone
; NoZones Causes zone support to be turned off, as in BT 1.50 and ealier
; PrivateNet Designates private network number, used mostly with point nets
; Boss Net/Node of your Boss (if NOT a point, then your node address)
; BossPhone Phone number for your Boss (override nodelist)
; BossPwd Password for use during Boss mail sessions (overrides nodelist)
; NetMail Location of your "Matrix" message area
; NetFile (Default) Location of your inbound files area
; KnownInbound (Known) Location of your inbound files area
; ProtInbound (Protected) Location of your inbound files area
; Hold Location of your outbound hold area
; Domain Define domain name, 8-char abbreviation, nodelist filename
; Nodelist Where your system stores its nodelist files
; NewNodelist Tells BinkleyTerm to expect "new format" Opus-style nodelist
; QuickNodelist Use QuickBBS 2.01 nodelist as compiled by ParseLst
; TBBSList Use TBBS nodelist as compiled by ParseLst
; Dial Dial translation entries (refer to docs for details)
; ScriptPath Designates directory to find outward dialing scripts
; Reader Command line to invoke reader/editor with Alt-E command
; Overwrite Allows overwriting of existing inbound files of the same name
; (ARCmail files excepted)
; Unattended Makes BinkleyTerm always start-up in unattended (mailer) mode
; NoFullScreen Forces BinkleyTerm to not use the fancy full screen mode
; BoxType Designates type of boxes to draw for windowed interface
; Colors For windowed interface, gives screen color attributes
; NOTE! The winner of our screen colors contest is Mark Kromm of 1:261/1034
; NOTE! Mark gets a configuration verb named after him - and here it is!
; Mark_Kromm Makes colors 112, 9, 10, 11, 14 and 12
; ScreenBlank If used, makes screen blank after 10 minutes of inactivity
; CursorCol Gives screen column number for cursor "resting place"
; CursorRow Gives screen row number for cursor "resting place"
; NoSlo Tells BinkleyTerm not to use SEAlink Overdrive
; SmallWindow Reduces "run ahead" during LoTek transfers (for hi-speed modems)
; Okfile (Default) List of files okay for file request (for Binkley)
; Avail (Default) List of files okay for file request (for humans)
; About (Default) Your system's advertisement
; MaxReq (Default) Maximum files to be sent during any one f'req session
; MaxBytes (Default) Maximum bytes to be sent in one session's freqs
; KnownReqList (Known) List of files okay for file request (for Binkley)
; KnownAvail (Known) List of files okay for file request (for humans)
; KnownAbout (Known) Your system's advertisement
; KnownReqLim (Known) Maximum files to be sent during any one f'req session
; KnownMaxBytes (Known) Maximum bytes to be sent in one session's freqs
; ProtReqList (Protected) List of files okay for file request (for Binkley)
; ProtAvail (Protected) List of files okay for file request (for humans)
; ProtAbout (Protected) Your system's advertisement
; ProtReqLim (Protected) Maximum files to be sent during any one f'req sess
; ProtMaxBytes (Protected) Maximum bytes to be sent in one session's freqs
; NoRequests Makes your system refuse any and all file requests
; ReqOnUs Whether to send inbound F Reqs when you initiate the call
; ReqTemplate (Default) Name of request response file template
; KnownReqTpl (Known) Name of request response file template
; ProtReqTpl (Protected) Name of request response file template
; NoPickup Tells BinkleyTerm to send mail during a session and not take any
; SameRing For modems that use RING reponse on inbound and outbound calls
; NoCollide Disables call collision detection for modems that hate it
; Shell DOS Shells...jumps to DOS, issues command (Alt-F1 thru Alt-F9)
; Timeout How long to wait for mail before assuming a human caller
; Banner Line displayed when someone calls
; BBSNote String to send to callers after they press Escape
; DoingMail String to send to callers during non-BBS events
; EnterBBS String to send to callers to prompt for input to access BBS
; ExtrnMail Designates errorlevel exit and string to match for external
; mailer or user-selected BBS functionality
; MailNote String to send when external mail handler is being loaded
; BBS Type of exit to the BBS to make when someone calls
; AfterMail Program or batch file invoked after receiving mail to process
; Cleanup Program or batch file invoked once before each scheduled event
; Packer Program or batch file invoked once just after 'Cleanup' is run
; NoWaZOO Forces BT to be an FSC-only mailer
; Janusbaud Baud rate at or below which all sessions could do Janus
; JanusOK Modem connect string for Janusbaud exception condition
; TaskNumber Arbitary task identifier for use in multitasking situations
; Flags Directory in which task identifier is created
;
; ----------------------------------------------------------------------------
;
System Walden Puddle BBS
Sysop Kevin Brokaw
Address 100:950/0.0
Address 100:950/4.0
Address 69:1000/114.0
Address 77:510/0.0
Address 77:510/100.0
Address 1:143/114.0
; The following Disables EMSI operation
; NoEMSI
; The following enable EMSI operation
MyLocation Newark, CA (Shake-and-bake)!
MyPhone 1-510-795-7660
MyListFlags CM,XA,V32B,V42B
MyMaxBaud 19200
;; Pick up all mail under AKA's
PickUpAll
;NoZones
; PrivateNet 9999
; Boss 9999/9999
; BossPhone 555-1234
; BossPwd Password
NetMail d:\binkley\mail\
NetFile d:\binkley\files\
; KnownInbound c:\binkley\fileknow\
; ProtInbound c:\binkley\fileprot\
Hold d:\binkley\outbound\
;
; Domain fidonet.org fidonet nodelist
; Domain alternet.ftn alternet anetlist
; Domain eggnet.ftn eggnet egglist
;
Nodelist d:\binkley\node
;Version6
Version7
; QuickNodelist
; TBBSList
; Dial 1-404- "GA_PCP.SCR"404/ ; Example of dial translation
; Dial 1-603-888 888/ ; Example of dial translation
; ScriptPath c:\binkley\scripts\
Reader d:\binkley\golded
; Overwrite
Unattended
; NoFullScreen
BoxType 4
; Colors 113 30 30 30 31 31 113 15 ; Requires VFOSSIL
Mark_Kromm ; Requires VFOSSIL
; ScreenBlank ; Requires VFOSSIL
; ScreenBlank Call ; Requires VFOSSIL
CursorCol 1
CursorRow 1
; NoSlo
SmallWindow
Okfile d:\binkley\okfile.txt
Avail c:\wildcat2\ok\pudl_fls.zip
About d:\binkley\about.txt
MaxReq 6
MaxBytes 500000
MaxTime 8
;KnownReqList d:\binkley\okfile.txt
;KnownAvail c:\wc30\puddlist.zip
;KnownAbout d:\binkley\about.txt
;KnownReqLim 6
;KnownMaxBytes 400000
; ProtReqList c:\binkley\okfile3.txt
; ProtAvail c:\binkley\myfiles3.arc
; ProtAbout c:\binkley\mysys3.txt
; ProtReqLim 15
; ProtMaxBytes 1000000
; NoRequests
; ReqOnUs
ReqTemplate d:\binkley\sample.tpl
;KnownReqTpl d:\binkley\sample.tpl
; ProtReqTpl c:\binkley\prot.tpl
; NoPickup
; NoSharing
; RingTries 5
; SameRing
; NoCollide
; Shell 1 Sysopus ; Alt-F1 would send "Sysopus" to COMMAND.COM
Shell 2 Amax ; Alt-F2 would send "Amax" to COMMAND.COM
Timeout 20
;Banner
BBSNote Ok, loading Wildcat... please wait....
;DoingMail Sorry, only the network mailer is presently up.
DoingMail Sorry, we're processing mail now. Please call back after 6:00 AM PST
;EnterBBS --------------------------------------------------------------------
EnterBBS Press "ESC" to enter the BBS now (BBS will auto-start in 20 seconds).
; ExtrnMail 150 Gimme WidgetLink
; BBS Exit
; BBS Spawn
BBS Batch
; AfterMail Unpack.Bat
; CleanUp Scrub.Bat
; Packer Pack.Bat
; NoWaZOO
;
Janusbaud 38400
; JanusOK /Arq/V32
; JanusOK /V32
;
;TaskNumber 1
;Flags D:\binkley\flags
;
;erial 536F5F576861743F
; ----------------------------------------------------------------------------
; Please refer to the documentation for more details on BinkleyTerm set-up...
; That's why there's documentation included in the package.
; ----------------------------------------------------------------------------
;